Jerome J605-Gold Film Hydrogen Sulfide AnalyzerJerome J605-Gold Film Hydrogen Sulfide Analyzer
If you have specific questions, please contact firstname.lastname@example.org
If you would like a quote for this product, please fill out the form below.Please reference that you are requesting a quote via the online store.
The newest H2S analyzer from Arizona Instrument LLC is the Jerome® J605 Hydrogen Sulfide Analyzer. The Jerome® J605 can read as low as 3ppb with an incredible resolution of 20ppt.
The J605 is housed in a light and ergonomically designed case, setting a new precedent for low-level, portable monitors. The industry-proven, gold film sensor has been upgraded and improved from previous models, resulting in longer life expectancies.
Ultra-Sensitive: Detect hydrogen sulfide in the air at levels as low as 3 parts per billion (3ppb).
Proven: Jerome’s gold film sensing technology has been validated in the laboratory and in the field for more than 35 years.
Rugged: Its sturdy metal housing makes the J605 tough enough for nearly any environment.
Reliable: With 18 hours of battery life per charge, the J605 is always ready when you need it.
Smart: Features onboard data logging for up to 20,000 measurements, USB data transfer, and SCADA interface capabilities through 4-20ma output.
Features and Benefits
Ultra Low-Level Detection: The Jerome J605 can detect H2S in air at levels as low as 3 parts per billion (ppb) with a resolution of 20 parts per trillion (ppt).
Gold Film Sensor: Validated in the field and in the lab for over 35 years, our proprietary gold film sensor ensures repeatable results across a wide range of applications.
Versatile: With a detection range of 3 ppb to 10 ppm, the J605 is ideal for a variety of applications, including regulatory compliance and odor control at wastewater and landfill facilities, scrubber efficiency testing and monitoring corrosion in control rooms, among others.
Regulatory Compliance: The J605 is in active use by many regulatory agencies and landfill, water treatment and waste management facilities across the world.
Data Logging: The integrated data logging system of the J605 can store data for up to 20,000 samples, including date, time and up to 80 locations.
Survey Mode: While in survey mode, the J605 continuously draws in samples of air to help users sweep an area for hydrogen sulfide hot spots and enable corrective action to be taken.
Field Regeneration: The J605 boasts a battery life of 18 hours and offers battery powered sensor regeneration that can be performed wherever and whenever you need it, allowing for extended testing in the field.
Rugged Construction: Housed in a light, ergonomically designed, durable metal casing, the J605 sets a new precedent for portable, low-level H2S monitors.
Intuitive Interface: The J605 offers simple, menu-driven operation as well as easy-to-understand diagnostics and error detection. It does not require PC software and comes with a USB interface for easy data transfer.
|Detection Range:||3 ppb (0.003 ppm) – 10 ppm|
|Resolution:||20 ppt (0.02 ppb) *range dependent|
±1 ppb at 5 ppb
±3 ppb at 50 ppb
±0.03 ppm at 0.5 ppm
±0.3 ppm at 5.0 ppm
|Response Time:||Survey Mode: 12-27 seconds
Manual Mode: 12-27 seconds
Auto Mode: 12-53 seconds
|Flow Rate:||150 mL/min|
|Result Units:||ppm, ppb|
|Autosample Intervals:||1, 2, 5, 10, 15, 30, 45, 60, 90 or 120 minutes|
|Integrated Data Storage:||20,000 test results; retains date, time and up to 80 locations|
|Display:||3.5” (9 cm) backlit LCD|
18 hour life, charges in 3 hours
|Power Requirements:||12 VDC for the instrument;
100-240 VAC, 47-63 Hz, 1.3A for the AC power supply
|Operating Environment:||0°C to 40°C, non-condensing, non-explosive|
|Output:||Digital: USB serial data to PC, printer or USB flash drive
Analog: 4-20 mA passive current loop; accurate to 0.3% of output
|Dimensions:||11″ L x 6″ W x 6.5″ H
(28 cm L x 16 cm W x 17 cm H)
|Weight:||5.4 lbs. (2.5 kg)|
|Warranty:||1 year, factory parts and labor|
|Certifications:||TUV 61010, CE|