Jerome 651-Hydrogen Sulfide Monitoring SystemJerome 651-Hydrogen Sulfide Monitoring System
If you have specific questions, please contact firstname.lastname@example.org
The Jerome® 651 monitoring system from Arizona Instrument LLC is the system you need to solve your hydrogen sulfide monitoring problems. Designed to provide long-term monitoring even in extreme weather conditions, it can be stationed at any location. Multiple units can be linked to form a perimeter monitoring system. Data logging and radio telemetry capabilities make downloading data convenient and easy from a remote PC
Unattended: The 651 is designed for set-and-forget hydrogen sulfide monitoring, inside or out.
Flexible: A detachable hand-held hydrogen sulfide analyzer is contained within the unit for pinpointing a gas source.
Smart Alarms: Define alarm points that meet your needs and receive email notifications and warnings.
Wireless: Measurement data is transmitted wirelessly from 651 stations to the user’s PC.
Rugged: The 651 is housed in a steel casing, insulated, air-conditioned, and ready for nearly any environment.
Features and Benefits
Perimeter Monitoring: Multiple Jerome® 651 units can be linked to form a perimeter monitoring system to help locate the source of H2S and ensure safety and compliance.
Detachable Unit: Quickly and easily sweep an area for hydrogen sulfide hot spots with the detachable, hand-held Jerome® 631-X hydrogen sulfide analyzer.
Gold Film Sensor: Validated in the field and in the lab for over 35 years, our proprietary gold film sensor ensures repeatable results across a wide range of applications.
Weather Station: An attached weather station monitors outside temperature as well as wind speed and direction for increased accuracy in pinpointing the source of odor contamination.
Data Transmission: Advanced data logging and radio telemetry capabilities make downloading data to a remote PC easy and convenient.
PC Software: Intuitive PC software with user-selectable time-weighted average reporting and a site view tab give users a bird’s eye view of the monitoring system as a whole.
Programmable Alarms: The 651 comes with programmable alarms that automatically send email alerts if your H2S levels rise above your specified upper limit.
Temperature Controlled Interior: Resistive heating and thermoelectric cooling keep the interior of the 651 at a consistent temperature for increased accuracy.
Regulatory Compliance: The 651 is in active use by many regulatory agencies and landfills, water treatment, and wastewater management facilities across the world.
|Detection Range:||3 ppb (0.003 ppm) to 50 ppm|
|Resolution:||0.001, 0.01, 0.1, and 1 ppm|
|Accuracy:||±0.005 ppm at 0.05 ppm
±0.05 ppm at 0.5 ppm
±0.5 ppm at 5 ppm
±2 ppm at 25 ppm
|Sample Intervals:||1, 2, 5, 10, 15, 30, 60 or 120 minutes|
|Regeneration Intervals:||6, 12, 24 and 48 hours|
|Flow Rate:||150 mL/min|
|Operating Environment:||-40 to +55°C, non-explosive, 0-100% relative humidity|
|Result Units:||ppm, ppb|
|Data Storage Capacity:||50,000 readings|
|100-120 VAC, 50/60 Hz, 7 A or
210-240 VAC, 50/60 Hz, 4 A
|Control Board Fuse:||Fast-acting IEC 1.6 A 250 V, 5 mm x 20 mm|
|Case Construction:||Polyester with insulation to reduce heat transfer|
(Detached 631-X Unit):
|Estimated Sensor Life:||3 to 6 months depending on operating conditions|
|Display:||8 digit alphanumeric LCD|
Analog: 4-20 mA passive current loop
|Dimensions:||26″ W x 25″ H x 9″ D
(67 cm W x 64 cm H x 23 cm D)
|Weight:||52 lbs. (24 kg)|
|Warranty:||1 year, factory parts and labor except for the 631-X sensor|
Nano Radio Modem Specifications
|Frequency:||2.4 – 2.4835 GHz (2400 MHz)
49 selectable channels
|Power Requirements:||10-30 VDC, 450 mA|
|Operating Temperature:||-40°C to 75°C|
|Range:||Up to 4 miles (6.4 km) “line of sight.”
Longer distances may be obtainable
through use of a high gain antenna
or by using the optional Radio Repeater